| View previous topic :: View next topic |
| Author |
Message |
Dave_A
Joined: 21 Dec 2007
Posts: 5
Location: Iraq (normally WA, USA)
|
| Posted: Sun Dec 23, 2007 12:33 pm Post subject: Bendix/King KT-76A transponder question |
|
|
Does this transponder have it's own altitude encoder, or does it require an external device?
Is there any transponder model that will give you Mode C functionality WITHOUT an external encoder? |
|
| Back to top |
|
Sean Caranna
Joined: 11 Aug 2004
Posts: 175
Location: Daytona Beach, FL
|
| Posted: Wed Dec 26, 2007 11:12 pm Post subject: |
|
|
| There are none that I know of, however encoders are only about $150-$250 and small |
|
| Back to top |
|
planecrazzzy
Joined: 01 Jan 2005
Posts: 175
Location: Minnesota
|
| Posted: Thu Dec 27, 2007 8:33 am Post subject: Re: Bendix/King KT-76A transponder question |
|
|
Sounds like you have a Class "B" problem..... "I" have it too ( KMSP )
Have you tried Wentworth....Maybe you could pick up a used unit...
I have a Narco AT150 Transponder w/ AR850 Altitude encoder ( about $1500 total -new)
Gotta Fly...
Mike & "Jaz" in MN
.
.
Dave_A wrote: Does this transponder have it's own altitude encoder, or does it require an external device?
Is there any transponder model that will give you Mode C functionality WITHOUT an external encoder? |
|
| Back to top |
|
Dave_A
Joined: 21 Dec 2007
Posts: 5
Location: Iraq (normally WA, USA)
|
| Posted: Mon Dec 31, 2007 2:06 pm Post subject: Re: Bendix/King KT-76A transponder question |
|
|
planecrazzzy wrote: Sounds like you have a Class "B" problem..... "I" have it to ( KMSP )
Yep... Seattle...
Just gathering info, thanks...
Bought a project (Turner T-40AS) that needs the wing built, some covering (plywood) and the mechanical/electrical done... But I have to get back from Iraq & pick up the plane (well, plane parts) first...
Trying to figure out how all this stuff is put together, a/o just hopping in the cockpit & using it.... |
|
| Back to top |
|
| |
