Wings Forum Forum Index Wings Forum
Forum for homebuilt experimental & light sport aircraft pilots, owners, & builders.
 

Friendly Advice on Taping From a Novice
Click here to go to the original topic

 
       Wings Forum Forum Index -> Just Aircraft
View previous topic :: View next topic  
Author Message
scubarider



Joined: 24 Dec 2006
Posts: 287
Location: Cleveland, GA

Posted: Tue Sep 25, 2007 7:42 am    Post subject: Friendly Advice on Taping From a Novice  

I am in the middle of priming and painting the plane.  It is my first attempt at such a paint job.  I have found no matter how perfect you can get the primer and paint that the taping/glue is a show through.  They recommend that you use masking tape to get your straight lines on your covering tapes for glueing.  I did that and got some really good results on lineage.  The problem came when removing the masking tape the glue left some pretty dominant lines.  I thought this would be covered with primer/paint.  It shows.  I covered the wing WITHOUT masking tape and just did a pencil line to keep the tape straight.  Brushed the glue with NO lines showing. This covered MUCH better with NO seeing the glue line.  Just some advice from a novice.  8)
Dennis
Back to top  
Dave Krall CFII SEL SES



Joined: 14 Mar 2007
Posts: 342
Location: Seattle WA

Posted: Wed Sep 26, 2007 2:10 am    Post subject:  

That's cool, gonna use that one for sure. Thanks!
We're starting paint as soon as replacement pigmented top coat arrives. Recalled first batch because of bubbles.
Back to top  
scubarider



Joined: 24 Dec 2006
Posts: 287
Location: Cleveland, GA

Posted: Sun Sep 30, 2007 7:42 pm    Post subject: another  

Another tidbit I learned from Troy.  Before covering the wings put some medical tape over the false ribs.  It is smooth and protects very well.  Works great.
D
Back to top  
KevinC



Joined: 18 Aug 2005
Posts: 222
Location: Prosser, Washington

Posted: Sun Sep 30, 2007 8:57 pm    Post subject: another thing from a novice  

I used a piece of lexan to draw my tape lines.  Ran a sheet through a friends table saw - 1 inch, 2 inch and 3 inch - then put marks at the half way point with a sharpie.  Line the sharpie marks up with the center of the tube I am taping over - two pencil lines down both sides and 'viola'.  It worked pretty well.

probably old news, but fwiw.

Kevin
Back to top  
 
       Wings Forum Forum Index -> Just Aircraft
Page 1 of 1


Powered by phpBB Search Engine Indexer
Powered by phpBB 2.0.22 © 2001, 2002 phpBB Group