Horiz stab height front tip

For general discussion of the Kolb family of aircraft.
Includes: Firefly, Firestar, Mark III C, Mark III X, Kolbra, Sport 600, Slingshot, Twinstar Mark II, and Ultrastar

Horiz stab height front tip

Postby herbgh » Sat Apr 17, 2021 4:43 pm

Mounting the horiz stab and elevator on my bird that is a combo of three different Firestar 2's... The manual does not show the horiz stab height above the boom tube at the front...Help! Mike??
herbgh
New Member
 
Posts: 2
Joined: Fri Apr 16, 2021 8:13 pm

Re: Horiz stab height front tip

Postby planecrazzzy » Sun Apr 18, 2021 4:53 am

.
Does it show the height on the prints ?
.
My plane is in the pole barn.... with a pontoon boat next to it .

I'll see if I can get at it.

I've got more firewood to cut , So I haven't been messing with anything else , dodging weather...cutting / splitting wood
.
If I had to GUESS.... 1-3/4" was the number I remember ( 22 yrs ago )
.
Gotta Fly...

PS For some reason.... Kolb had to send me another one of those brackets... It was different than the ones I had.
I think it was Taller....( 1-3/4" )
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 1121
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Re: Horiz stab height front tip

Postby planecrazzzy » Mon Apr 19, 2021 8:06 am

.
Just a thought...
I had something wrong with my Chromoly HS mount...

When I got the replacements...They had adjusting holes.
.
( My Buttercup has the same adjustment...Usually down from neutral is where to start...)

Mine is still blocked in by the pontoon boat...and it's snowing.

up hill both ways too...
.
Gotta Fly...
.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 1121
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota


Return to Kolb Aircraft