Wheel pants for the RV-6, 7, 10

For general discussion of the Van's RV family of aircraft.
Includes: Van's RV-3, RV-4, RV-6, RV-7, RV-8, RV-9, RV-10, and RV-11

Wheel pants for the RV-6, 7, 10

Postby meglin » Mon Dec 19, 2016 1:03 pm

Production of wheel pants for the RV-6, 7, 10
The cost of one set of $440 (fiberglass) - 2 pcs (main wheels 5.00*5)
The cost of one set of $750 (Carbon) - 2 pcs (main wheels 5.00*5)
Weight of fiberglass fairing 900 g
The weight of carbon fiber fairing 700 g
On the fairing has a flap for the swap partition and the inner wheel.
Composition (base) - certified epoxy for aviation name of Epoxy 619 and the structural fabric of the T-10 (14). The method of vacuum forming and heat setting. They are light and strong, not afraid of blows, falling stones and walked on them. Caulking is not used. Guaranteed operation 3000 thousands of flight (about 5 years of active use) and post-warranty service. Product Data Sheet attached. The passport shows all performance characteristics.
All fairings are covered with soil and are ready for painting.
Manufacturing - within 15 working days from the date of payment.
Sending at EMS.
Attachments
5.png
5.png (116.9 KiB) Viewed 627 times
4.png
4.png (92.21 KiB) Viewed 627 times
3.png
3.png (97.18 KiB) Viewed 627 times
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 61
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine

Re: Wheel pants for the RV-6, 7, 10

Postby meglin » Tue Jan 03, 2017 8:25 am

Wheel spats for RV-7
Attachments
DSC_0952.JPG
DSC_0953.JPG
DSC02274.JPG
DSC02277.JPG
DSC02276.JPG
DSC02276.JPG (29.08 KiB) Viewed 564 times
Best regards
Vladimir Meglinsky
My site: http://propeller.simplesite.com/
meglin
Seasoned Member
 
Posts: 61
Joined: Sun Aug 16, 2015 9:22 am
Location: Ukraine


Return to Van's RV Aircraft

cron