Hi its me again, it has come to our attention there is a dispute on how to install the elevator pins. I will attempt to clear this up. I will also attempt to post pictures.
There is a piece of plastic tubing with your kit, put a piece of the tubing into each of the hinge points and cut off flush. Put the rudder and the elevators on and line ream with a long reamer to 3/16" The pins provided into your kit need to have a washer onto each end to keep retention. I hope the pictures work and you will be able to see what I'm talking about. The pins that you already have if your are converting from a highlander are the same pins. Jak
To Clear Things Up
-
- Veteran Member
- Posts: 445
- Joined: Mon Mar 17, 2008 9:40 pm
- Location: toccoa Ga
To Clear Things Up
You do not have the required permissions to view the files attached to this post.
Pick up a rifle and you instantly change from a subject to a citizen.
- kenryan
- Veteran Member
- Posts: 342
- Joined: Sat Jan 01, 2011 3:46 pm
- Location: anchorage, ak
-
- Veteran Member
- Posts: 494
- Joined: Sat May 17, 2008 12:34 am
- Location: Nampa Idaho