DXF File of Top and side view for Paint Scheme planning
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
DXF File of Top and side view for Paint Scheme planning
I did some searching but I was not able to find anything. Does anyone have a DXF file of the SuperSTOL or Highlander so I can import into autocad for paint scheme planning?
- Johnny C!
- Veteran Member
- Posts: 826
- Joined: Thu Sep 07, 2006 9:55 am
- Location: Brevard, NC
Re: DXF File of Top and side view for Paint Scheme planning
There were 2 views in the electronic manual that I
used, but they were jpg's that used with Paint, I
think.
If you want find them, I can email mine to you.
They are a top view & a side view of a Escapade.
I don't know what they have in the current manual.
John
used, but they were jpg's that used with Paint, I
think.
If you want find them, I can email mine to you.
They are a top view & a side view of a Escapade.
I don't know what they have in the current manual.
John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: DXF File of Top and side view for Paint Scheme planning
The SS manual is on the NZ agent's website: http://www.justaircraft.co.nz/.
Here's their link to the SS drawings: https://www.dropbox.com/sh/imuv00s5bv8j ... tlines.doc.
You might check with Lynn or Jak at the factory, and see what versions of the drawings they have.
Here's their link to the SS drawings: https://www.dropbox.com/sh/imuv00s5bv8j ... tlines.doc.
You might check with Lynn or Jak at the factory, and see what versions of the drawings they have.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: DXF File of Top and side view for Paint Scheme planning
Thanks guys.
I got the latest from the factory and I will convert it so it can be opened in paint. I will post the converted file soon.
I got the latest from the factory and I will convert it so it can be opened in paint. I will post the converted file soon.