FYI

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.
Post Reply
NFH
New Member
Posts: 1
Joined: Tue Feb 18, 2014 2:17 pm

FYI

Post by NFH »

Installing the horizontal stabilizer, the installation book says to adjust to a down incidence of 1.6 degrees. I questioned if this was a cord measurement or should be taken from front to back (front and back tubes are different sizes). Adam from the factory corrected me in thinking this is a cord measurement and in fact should be taken from the top of both the front and back supports, which is .3 degrees difference.
Post Reply

Return to “Just Aircraft”