914 Turbo Wiring diagram
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
914 Turbo Wiring diagram
I am about ready to start the wiring of my Super Stol and was wondering if anyone could post pictures and diagrams of your wiring.
Thanks! Oren
Thanks! Oren
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
I just used the wiring diagram in the rotax manual. I used all pullable breakers and jumpers on terminal blocks for the main bus powers. Is there anything specific you need help with?
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
Re: 914 Turbo Wiring diagram
Troy
I am looking for different ways to use fuseblock instead breakers .Pictures that would give me Ideas.
I would like to keep my panel simple and light. I am planning on using the Garmin Touch.
I will see if I can get the wiring diagram from Rotax. I bought my 914 used with approx 140 hrs.
Thanks! Oren
I am looking for different ways to use fuseblock instead breakers .Pictures that would give me Ideas.
I would like to keep my panel simple and light. I am planning on using the Garmin Touch.
I will see if I can get the wiring diagram from Rotax. I bought my 914 used with approx 140 hrs.
Thanks! Oren
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: 914 Turbo Wiring diagram
You can get the Rotax 914 Installation manual (IM-914) on the Rotax factory site at http://www.flyrotax.com/. Click on Tech Support, then Technical Publications.
Here's the direct link to the current manual: http://www.flyrotax.com/portaldata/5/dokus/d04273.pdf.
Here's the direct link to the current manual: http://www.flyrotax.com/portaldata/5/dokus/d04273.pdf.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
Re: 914 Turbo Wiring diagram
Troy
Would you have a picture if your panel since you labeled it ?
Thanks! Oren
Would you have a picture if your panel since you labeled it ?
Thanks! Oren
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
I am just uploading a video of the finish product explaining the panel too. It should help. Likely a couple of hours or so before it is live.
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
If you wanted to use a fuse block I would mount it to the inside of the panel with slots in the panel to be able to replace the fuse in flight. I only use fuse blocks for none flight effecting instruments, but this way you can still do something while airborne.
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
Here is a crappy phone pic. Hopefully it and the video helps you.
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
Re: 914 Turbo Wiring diagram
Thanks! for the picture it is very helpful.Looks great . What were the led lights that you used?
Oren
Oren
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
I got them from Vans Aircraft. Can't remember the supplier. They work great.orenjr wrote:Thanks! for the picture it is very helpful.Looks great . What were the led lights that you used?
Oren
-
- Veteran Member
- Posts: 304
- Joined: Sun Jul 01, 2012 11:59 am
- Location: Big Bear Airport
Re: 914 Turbo Wiring diagram
Sorry I don't know how to post a link, but if you search "electrical schematic" you will find another post on this subject and danerazz has a link to a nice fuse block that can be panel mounted. I didn't want panel mounted fuses so went with 2 surface mounted fuse blocks (one is the "main" the other is the "avionics".) Steinair is a good source for these, plus they have tools, connectors and AC quality wire. They sell some burly buss bars that are good for the ground-buss.
GDS
So Cal
Highlander #232
Rotax 912ULS, Dynon Skyview
So Cal
Highlander #232
Rotax 912ULS, Dynon Skyview
- danerazz
- Veteran Member
- Posts: 1240
- Joined: Tue Aug 18, 2009 9:33 pm
- Location: Bangor
Re: 914 Turbo Wiring diagram
Not where I bought mine, but the fuse block is available at http://www.mihdirect.biz
Dane
Paralysis by analysis
#242
Paralysis by analysis
#242
-
- Seasoned Member
- Posts: 62
- Joined: Tue Sep 17, 2013 6:58 am
Re: 914 Turbo Wiring diagram
Would any of you have pictures behind the panel of your wiring. The Superstol does not have much space for the efis and switches. I am moving my panel out approx 2" to increase space in front of bracing.
Thanks! Oren
Thanks! Oren
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: 914 Turbo Wiring diagram
In the posts of my Superstol build there is a picture from behind the panel. I used standoffs with long bolts and Adel clamps to support the panel.