SuperSTOL Aileron Detail

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

SuperSTOL Aileron Detail

Postby kenryan » Sat Mar 14, 2015 1:59 pm

On some SuperSTOL kits (inlcuding my #299) the aileron hinge front brackets are not symmetrical, and because the bolt pattern IS symmetrical it is possible to put them on upside down. There is no mention of this on the drawing. Look at the two outer holes and if one is closer to the edge than the other, that one goes up. If you get it wrong you will erroneously believe that you have to open up the hole in the trailing edge skin for the control tube.

Also, the drawing shows a castle nut being used on the hinge bolt, but the drawing text specifies a nyloc. Because this is a rotating part (the bushing is fixed) the proper nut is the castle nut (with cotter pin).
Super Stol Kit #299
User avatar
Veteran Member
Posts: 286
Joined: Sat Jan 01, 2011 3:46 pm
Location: anchorage, ak

Return to Just Aircraft