Pop... Pop... Pop Rivets...

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

Re: Pop... Pop... Pop Rivets...

Postby stede52 » Sat Nov 07, 2015 12:41 pm

Marl59
I tried to get some other pictures of the window but they just don't show much of anything.

Av8rps,
The CubCrafters site lists the costs of each kit, wing, fuse, finish(includes the 180hp engine) plus optional equipment). It is a 100% complete and quality kit (and it should be for that money :), you definitely get what you pay for in the kit.
Attachments
IMG_5046.JPG
Steve D N419LD
User avatar
stede52
Premium Member
 
Posts: 1039
Joined: Thu Sep 06, 2007 11:40 am
Location: Carnation, WA

Re: Pop... Pop... Pop Rivets...

Postby marl59 » Sun Nov 08, 2015 9:02 pm

Stede52,
Thanks very much for the pic. Nice clean look. I'm going to use that method/materials when I do my Highlander windows this winter. Thanks again!
User avatar
marl59
Forum Regular
 
Posts: 38
Joined: Thu Oct 22, 2015 5:59 pm
Location: Oakland, CA

Re: Pop... Pop... Pop Rivets...

Postby messenger » Tue Mar 14, 2017 9:14 am

Steve, I am replacing the lexan and you give instructions for the installation of the lexan on the doors and windows , and you say to do the install with the window and door frames on the plane in the closed or locked position, elaborate on that part a little for me. Is this to keep the frame in the correct form for the lexan? so drill the holes in the lexan, use clecos to hold in place, install everything on the plane then remove the tape strip and screw or pop rivet in place. thanks for your time, I have already installed one of your windshields and it is great.
messenger
Forum Regular
 
Posts: 49
Joined: Sat Aug 10, 2013 6:08 am

Re: Pop... Pop... Pop Rivets...

Postby Rambler » Sun Mar 26, 2017 11:25 am

I just tried the high bond tape on my highlander doors. Used pop rivets in the corners and half way down the sides. The tape will definitely pull loose in the high stress areas. I like the idea . But you may need more rivets in high stress areas. It would definitely lower number of rivets on top lexan and turtle deck lexan, though I did not test it there.
Rambler
New Member
 
Posts: 6
Joined: Sat Jan 02, 2016 9:06 am

Previous

Return to Just Aircraft