I have an 0-200a in my Zodiac 601 and would like to improve on the HP currently at 100. The compression is 7:1 so I believe there is a place where I can improve.
Does anyone have experience with this or can advise?
thanks
Wings Forum
Forum for homebuilt experimental & light sport aircraft pilots, owners, & builders.
Modifying the 0-200a
5 posts
• Page 1 of 1
Modifying the 0-200a
by SportPilot55 » Tue Dec 19, 2006 4:09 pm
- SportPilot55
- New Member
- Posts: 1
- Joined: Tue Dec 19, 2006 4:03 pm
- Location: Lantana, Florida
0200a upgrades
by rogpoyn » Tue Feb 03, 2009 3:00 am
One way to increase hp and compression is to use the c85 pistons. I think that the use of 100ll would be required since it will increase the compression and the risk of detonation. The c85 pistons have the same bore but are a bit taller. Also I seem to remember a reprofiled after market cam shaft that might be worth looking into. Have a good one Roger
roger
- rogpoyn
- New Member
- Posts: 2
- Joined: Mon Jan 05, 2009 2:11 pm
- Location: pauls valley, ok
Re: 0-200
by iHATErotax » Fri Sep 16, 2011 11:57 pm
S7flyer wrote:Has anyone found an advantage of this engine over the Rotax 912ULS?
yeah. Better TBO=Money, LEss complex easy to work on= save money, tons of parts to be had and many used engines=saves money, sounds like a REAL airplane engine not an RC.
- iHATErotax
- New Member
- Posts: 4
- Joined: Thu Sep 15, 2011 3:00 pm
Re: Modifying the 0-200a
by aeromike49 » Sat Dec 03, 2011 11:29 am
Call Lycon in Visalia Calif (559) 651 1070 or check the web site for Lycon
for info on HP increase including pistons etc. They can help
for info on HP increase including pistons etc. They can help
- aeromike49
- New Member
- Posts: 4
- Joined: Sat Dec 03, 2011 11:10 am
5 posts
• Page 1 of 1