I've got a question....or two....or three......

Welcome to the FORUM. The purpose of this forum is to "formally" introduce yourself to other members. Please tell us about your flying, hobbies, interests, etc. etc.

I've got a question....or two....or three......

Postby Bill Sellen » Mon Dec 20, 2004 10:49 pm

Hi, new member here. My name is Bill Sellen. Been bouncing around the web agonizing over the plane to choose for my first build attempt. Will appreciate feedback from fellow members. I'm interested in wood construction with a 4 cycle (probably VW) engine, single place, with a build time of not more than 350 hours.
To all, Happy Holidays, short winter and fair skies,
Bill[/b]
Bill Sellen
New Member
 
Posts: 1
Joined: Mon Dec 20, 2004 6:46 pm
Location: New Jersey USA

Postby Johnny luvs Biplanes » Thu Dec 23, 2004 10:11 pm

With that sorta build time you must be looking at a VP1 or 2!
Cheers,
John
Go love a biplane today :)
User avatar
Johnny luvs Biplanes
Forum Regular
 
Posts: 31
Joined: Thu Aug 12, 2004 3:58 pm
Location: Weybridge, Surrey, England

Postby Sean_Caranna » Fri Dec 24, 2004 1:28 pm

KITPLANES Magazine has a good article about this very topic at http://www.kitplanes.com/hobby/firsttimebuilders.html

Give it a read.

I selected the VP-2 based on a number of factors. The main one being that the VP-2 can be built within my limited budget and still give me the performance I want.

My good friend Dave York is building an Airbike. It also fits my budget but does not fit the mission I want. Selecting an aircraft is a major decision. It really has to be something that you can get excited about. I'm sure anyone here will tell you that even the most simple plane is still going to take a sizeable investment of time and cold hard cash.

I expect my VP-2 to take around $6,500 for the aircraft, $4,000 to $6,000 for the Firewall forward setup, and another $4,000 to $6,000 for the panel.

The published build times that most designers and kit makers give you are for the airframe only and assume that you have a fully tooled shop, are already a great wood, composite, or metal worker and that you will loose no time picking up from where you left off when you have to take a break from building. They can be a guide for comparison but take with a grain of salt. Engine, instruments, upholstery, and paint will take more time.

Sean C.
"I'll have what the gentleman on the floor is having."
User avatar
Sean_Caranna
Owner
 
Posts: 231
Joined: Thu Aug 12, 2004 12:34 am
Location: Daytona Beach, FL

Postby Johnny luvs Biplanes » Fri Dec 24, 2004 11:17 pm

Bill, do you have anything in mind?
What about your favourite styles of aeroplane?
John
Go love a biplane today :)
User avatar
Johnny luvs Biplanes
Forum Regular
 
Posts: 31
Joined: Thu Aug 12, 2004 3:58 pm
Location: Weybridge, Surrey, England


Return to Introductions