Anybody else going crazy from building?

Welcome to the FORUM. The purpose of this forum is to "formally" introduce yourself to other members. Please tell us about your flying, hobbies, interests, etc. etc.

Anybody else going crazy from building?

Postby [email protected] » Sun Dec 10, 2006 8:46 pm

Hey all,

Well I am 3 1/2 years into a project I didn't exactly understand when I started, but I know a lot more now!  I am done with wings, fuselage, flight controls, control surfaces. Working now on engine, plumbing, wiring, etc..  I kick myself for being two years behind on my ambitious target date but I'm still at it. Good thing is I built a shop at home so my commute isnt bad. Bad thing is it's so small I can almost reach every tool from everywhere in it.

I have found that I can't study for my IFR and work on my plane at the same time. If I start studying one thing I completely erase the other and have to start over. ANybody else got a small brain like me?  I haven't been flying much because of the money pit in the garage. I guess I'll make up for it with 40 hours of solo quiet time.
[email protected]
New Member
 
Posts: 6
Joined: Sun Dec 10, 2006 6:53 pm

Pilot skills

Postby planecrazzzy » Sun Dec 10, 2006 9:22 pm

Hi,
    it's the same old problem.....can't put the money into flying cause yer puttin it inti an airplane....

My first build was a Kolb Firestar II , all I could afford to fly was my Buckeye Powered Parachute ( NO HELP )

but luckly I needed to get my Tailwheel endorsment....PA-12 & Aeronca ....so that shook off the rust....

Now my next plane is a W-10 Tailwind , but I have my Kolb Firestar to keep my Pilot Skills polished up....

As far as setting a date to be finished.....They say "don't do that"

Actually, after I was done building my plane....I "MISSED" the building process....

I had to wait til I sold my Powered Parachute before I could start my next plane ( I need the room )

Speaking of room , I started my last plane in a BASEMENT......moved on to a single car garage......and finally to a two car / Heated garage...( see my web site )


Now when I start my next plane ..... Half the year (winter)I have my wings folded , and it's in the garage....Back to a confined work area....


I don't blame you for not wanting to add too much info in the brain while thoughts are working on building projects and problems.....you need a break , to give the other stuff the attention it needs....

So, is anybody else crazy from building....?

I'm  Planecrazzzy ,  Glad to meet you .

                                                        Gotta Fly...
                                                                        Mike & "Jaz" in MN
Attachments
My X country flight to Baraboo WI 002.jpg
Me & Jaz headed to a Tailwind Fly-in
My X country flight to Baraboo WI 002.jpg (60.74 KiB) Viewed 4647 times
Windscreen Support 006.jpg
Windscreen Support 006.jpg (62.08 KiB) Viewed 4647 times
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 744
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Postby [email protected] » Mon Dec 11, 2006 9:20 am

Thats too funnny, Ive got a westie that is ready to fly it's just my plane isn't. Part of my delay is my own fault I decided to build an IFR capable from the ground up instead of adding on later. The wiring schematics are wearing me down. I am very glad to see there is somebody out there who has done it and survived it. My wife is tired of hearing about it and doesn't entirely get how much goes into the thought process and planing. She is still pretty cool when she sees small progress and improvement but maybe wonders why it takes sooooo long. So do I sometimes.  Cold there Yet????
[email protected]
New Member
 
Posts: 6
Joined: Sun Dec 10, 2006 6:53 pm

You have a BIG project

Postby planecrazzzy » Mon Dec 11, 2006 8:11 pm

Hi Joel,
          When I first wrote to you , I didn't realize how BIG your project was....HOLY COW Comp Air 6.......That's a BIG BITE.

But like you said about the IFR stuff ..... I built mine ( smaller project ) enough to get it in the air , then improve some things

later....I'm working on a full encloser.....

There are some things that you just can't  take short cuts....or you just end up wasting money later to replace it...

   So , you figured out what plane your gonna build next ?

My Tailwind should take me a little while , although some guys can build one in a year....( retired )

If you take yer Dog flying , you might want to check out -     http://www.safeandsoundpets.com/index.html

They have a size to fit any dog.....any size - same price - $52 bucks


It got cold up here for a little bit....but this week it's back in the 40's ( I'm from Calif - That's STILL Cold )


                                               Gotta Fly...
                                                               Mike & "Jaz" in MN
Attachments
Pulling Firestar.JPG
Pulling Firestar.JPG (60.91 KiB) Viewed 4638 times
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 744
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Kolb classic

Postby Skysailor » Thu Dec 27, 2007 10:08 pm

Hello.! Loking to buy Kolb classic 2 seatter. Possible without engine. 416-7890626
Skysailor
New Member
 
Posts: 4
Joined: Thu Dec 27, 2007 7:25 am

Re: Kolb classic

Postby planecrazzzy » Thu Dec 27, 2007 11:04 pm

Check with the Matronics Forum   ( Kolb section )
http://forums.matronics.com/index.php?s ... 1eaf8deae8

They can help you out fer sure......

                                                   Gotta Fly...
                                                                    Mike & "Jaz" in MN
.
.




Skysailor wrote:Hello.! Loking to buy Kolb classic 2 seatter. Possible without engine. 416-7890626
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 744
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Thank's

Postby Skysailor » Fri Dec 28, 2007 11:25 am

Thankyou.!
Skysailor
New Member
 
Posts: 4
Joined: Thu Dec 27, 2007 7:25 am


Return to Introductions