Becker Transponder not transmitting Mode C

Use this forum for in-depth discussion of avionics. radio, and GPS performance, design, options, and installation.
Post Reply
Garth
New Member
Posts: 2
Joined: Tue Oct 22, 2013 11:53 am

Becker Transponder not transmitting Mode C

Post by Garth »

I have a Becker 4401 transponder that has stopped transmitting Mode C altitude data. It is fed by a Dynon D180 EFIS via a Dynon serial to parrellel gray code converter. It has worked fine for 4 years. Looking for ideas on how to troubleshoot this. I want to avoid removing the transponder (not an easy job) and sending it out to be tested only to find the problem is the converter or the encoder embedded in the EFIS.

Thx for any suggestions.

Garth
Post Reply

Return to “Avionics, Flight Instruments & EFIS”