What did you guys & ladies use to
open up the pass through tubes. I
broke a drill bit on the first one.
Please let me know!
Merry Christmas!
John
Flying Wire Guide Tubes...
- Johnny C!
- Veteran Member
- Posts: 826
- Joined: Thu Sep 07, 2006 9:55 am
- Location: Brevard, NC
Flying Wire Guide Tubes...
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
-
- Veteran Member
- Posts: 287
- Joined: Sun Dec 24, 2006 10:06 am
- Location: Cleveland, GA
bits
I used a long drill bit for the openings and then used a file and whatever else I could find.
Was pretty tough. I broke and dulled many a bit in this process.
D
Was pretty tough. I broke and dulled many a bit in this process.
D
Living life on the edge makes me dizzy. I love Dizzy!
-
- Veteran Member
- Posts: 922
- Joined: Wed Mar 14, 2007 11:29 pm
- Location: Seattle WA
- Johnny C!
- Veteran Member
- Posts: 826
- Joined: Thu Sep 07, 2006 9:55 am
- Location: Brevard, NC
Thanks guys.
I just wanted to make sure I hadn't missed
some neat trick. If you all had trouble with
them, then I guess it's OK for me too!
Merry Christmas!
John
I just wanted to make sure I hadn't missed
some neat trick. If you all had trouble with
them, then I guess it's OK for me too!
Merry Christmas!
John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
- Johnny C!
- Veteran Member
- Posts: 826
- Joined: Thu Sep 07, 2006 9:55 am
- Location: Brevard, NC
Hey,
I finished the rest of the holes with the
broken drill bit. I figured it was toast,
so I had nothing to lose.
See Ya!
John
I finished the rest of the holes with the
broken drill bit. I figured it was toast,
so I had nothing to lose.
See Ya!
John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed