My wings

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

My wings

Postby rgmullins » Sat Jan 12, 2008 8:57 am

Thought I would post a few pics of my baby. I decided to put on a metal leading edge and permanently attach the tips
Attachments
covered.jpg
covered.jpg (68.98 KiB) Viewed 2822 times
wing.jpg
wing.jpg (103.24 KiB) Viewed 2822 times
tip.jpg
tip.jpg (85.05 KiB) Viewed 2822 times
rgmullins
Veteran Member
 
Posts: 103
Joined: Tue Sep 04, 2007 8:21 am
Location: Cincinnati

Postby b1x4nqb » Sat Jan 12, 2008 9:23 am

Looks real nice!  I never thought of it before, but I guess you don't use the false ribs with the leading edge wrap?  Larger tanks also....  Very cool.

Paul, PA
b1x4nqb
Veteran Member
 
Posts: 282
Joined: Mon Aug 14, 2006 11:53 am
Location: Orwigsburg, PA

Nice Wing Work

Postby Wes » Sat Jan 12, 2008 9:58 am

RG,
Nice work on the wings, - the permanent tips will look real smooth.
I have yet to start on my wings.
I plan to also do the leading edge wrap with alum' sheet. What material did you use? I saw in a prev post they used .020 in.
What alloy/temp? 6061 -T6?
Any issues with the trailing edge of the wrap, i.e. fabric stress/protrusions?

Keep up the good work, gonna' be "showy" airplane.

Wes

Kit #95
Kit # 95
Low and Slow - The only way to go!
User avatar
Wes
Premium Member
 
Posts: 231
Joined: Mon Jan 23, 2006 10:32 pm
Location: Satellite Bch, Florida

Postby stede52 » Sat Jan 12, 2008 1:34 pm

Very nice, I'll be covering soon myself
Steve
User avatar
stede52
Premium Member
 
Posts: 1039
Joined: Thu Sep 06, 2007 11:40 am
Location: Carnation, WA

great

Postby scubarider » Sat Jan 12, 2008 6:04 pm

Looks really nice.  Would you ever have to remove your wing tips?  I had to due to wiring.  Just wondering.
Dennis
Living life on the edge makes me dizzy.  I love Dizzy!
scubarider
Veteran Member
 
Posts: 287
Joined: Sun Dec 24, 2006 10:06 am
Location: Cleveland, GA

Postby Uwe Jens » Sat Jan 12, 2008 7:05 pm

Hi
The wings look really nice; but I do not know how the aluminum leading edge works on the wings flexibility due that these wings are built with two aluminum tubing spars ( making them very flexible) and not with only one central I beam which is more rigid.  I hope that with stress your aluminum leading edge will not separate from the wood ribs.
Good luck,
Uwe/.
Uwe Jens
Seasoned Member
 
Posts: 82
Joined: Mon Aug 28, 2006 2:06 pm
Location: Salcedo-Cotopaxi-Ecuador

Postby rgmullins » Sat Jan 12, 2008 9:51 pm

Paul - We still used the false ribs, we just shorted and reshaped them. After the leading edge was glued on we wedged and glued them into place and it gave it a nice solid feel.

Wes - I ordered the leading edge material from Aircraft Spruce (they're getting a lot of business from me lately)
Part # 03-30800. It's .016 and 2024T3. No problems at all attaching the fabric. We curled the trailing edge of it down sightly so it wouldn't have a hard edge.

Dennis - We debated whether we would ever need to remove the tips again and decided we probably wouldn't. I have wing tip lights and ran the wire before gluing the fabric on, and epoxied the nuts to the inside so that we can remove them if they should need repair. If we ever ground looped it would make repair more difficult but we decided we wanted to make the wing as clean as we can.

Uwe - I talked to Troy about it before we built it. There are several that have been built that way (and the factory built one that way but it was destroyed in a crash) I haven't heard of any problems. but you bring up a good point and we considered it when we were building it. We used the structural epoxy and pop rivets (not in the leading edge though) to fasten them down so if flexing is an issue I think what we will see will be some buckling in the aluminum, it's only .016 thick. But hopefully that won't happen. I'll have to try to keep the G forces below 4 or 5... :-)
Attachments
glue down.jpg
glue down.jpg (80.53 KiB) Viewed 2775 times
leading edge.jpg
leading edge.jpg (76.09 KiB) Viewed 2775 times
rgmullins
Veteran Member
 
Posts: 103
Joined: Tue Sep 04, 2007 8:21 am
Location: Cincinnati

Postby Dave Krall CFII SEL SES » Sun Jan 27, 2008 10:00 pm

Nice looking wings and wingtip lights. Where are you running the strobe cables and other light wires and how will you attach them? Holes through the ribs?
Dave Krall CFII SEL SES
Veteran Member
 
Posts: 922
Joined: Wed Mar 14, 2007 11:29 pm
Location: Seattle WA

Postby rgmullins » Wed Feb 13, 2008 9:29 am

Finally have the painting almost done. Had a fit with dust but I'm really liking the polyfiber finish..
Image
Rick Mullins #144
Cincinnati
rgmullins
Veteran Member
 
Posts: 103
Joined: Tue Sep 04, 2007 8:21 am
Location: Cincinnati


Return to Just Aircraft