pic of the nose and tail.....**smile**

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.
Post Reply
User avatar
scubarider2
Topic Moderator
Posts: 1085
Joined: Mon Jan 28, 2008 7:03 pm
Location: Cleveland, GA

pic of the nose and tail.....**smile**

Post by scubarider2 »

Just thought I would post the last couple things added to the plane.  I got the nose cone on.  Works great.  Had to cut some to go over the extension plate for the Warp Drive Prop.  Also a pic of the tail section hole cover.  I just cut some lexan and drilled the holes and put in some screws into the inspection ring.
Dennis
You do not have the required permissions to view the files attached to this post.
User avatar
stede52
Premium Member
Posts: 1066
Joined: Thu Sep 06, 2007 11:40 am
Location: Carnation, WA

Post by stede52 »

Dennis,
how much gap do you have between the spinner and the front of of the cowl.

Steve
User avatar
scubarider2
Topic Moderator
Posts: 1085
Joined: Mon Jan 28, 2008 7:03 pm
Location: Cleveland, GA

Post by scubarider2 »

Steve,  I have approx. 1 in clearance between the spinner and the front of the cowl.
Dennis
Post Reply

Return to “Just Aircraft”