What kind of swivel connector are people using to connect the push/pull cable to the heat box flap control arm? For some reason I'm having a senior moment in finding something that works.
Steve
Cabin Heat Box
- stede52
- Premium Member
- Posts: 1066
- Joined: Thu Sep 06, 2007 11:40 am
- Location: Carnation, WA
-
- Veteran Member
- Posts: 282
- Joined: Mon Aug 14, 2006 11:53 am
- Location: Orwigsburg, PA
-
- Veteran Member
- Posts: 181
- Joined: Sat Jan 27, 2007 11:01 pm
- Location: Hampton, NH 7B3
-
- Veteran Member
- Posts: 922
- Joined: Wed Mar 14, 2007 11:29 pm
- Location: Seattle WA
AS sells a white plastic defroster opening with slider hole which I plan to mount on an Al flanged hole that they also sell, which will go through the extreme forward .032 stainless steel floor, right between the pilot's rudder pedals, with another hole on the passenger side between the pedals or through the firewall. The scat tube comes directly off the heat cuff to the flanged hole with the slider.
-
- Veteran Member
- Posts: 445
- Joined: Mon Mar 17, 2008 9:40 pm
- Location: toccoa Ga
Steve your fiend has a nice plane I did all the electrical on his plane and took it for a ride with Troy the day before I left for Sun-n-fun, anyway the heat on this plane is very good we opened just one side while in flight and had to close it very quickly, it got very warm inside. I might also mention that was the most fun I've ever had in plane.
-
- Veteran Member
- Posts: 181
- Joined: Sat Jan 27, 2007 11:01 pm
- Location: Hampton, NH 7B3