I have a Rotax 582 Bluehead with a (Moyes) large radiator installed on a Moyes Dragonfly.
Here temperatures are usually ISA + 20 Centigrade
I am getting up to 195 Fahrenheit degrees readings on the liquid (antifreeze-coolant)
The head temperature readings stay within limits
Isn´t this too much ?
Is it true I might have air trapped in the heads ?
Any suggestions ?
582 Coolant Temps
-
- New Member
- Posts: 2
- Joined: Sun May 06, 2007 10:54 am
- Location: Monterrey Mexico
- alan
- Veteran Member
- Posts: 399
- Joined: Fri Feb 04, 2005 1:39 am
- Location: Baytown, TX
Level the engine and remove the temperature sender from the middle of the head. Coolant should then flow out of the head. Immediately replace the sender. No more air will be trapped inside the head. Your fill cap is higher than the head, right?
Alan
Alan
If I had known I would live this long I would have taken better care of myself.