912 Radiator Question

For technical discussion of ALL Rotax aircraft engines.

912 Radiator Question

Postby Johnny C! » Wed Nov 10, 2010 1:49 pm

Hey Gang!
I was able to pick up a slightly used
radiator for my 912. I would like
to test it, but I'm concerned about
taking it to an automotive radiator
shop. Can I get some in put on how to
test it properly?


Thanks!

John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.

I would much rather be looking down at the runway, than up at it.

Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
User avatar
Johnny C!
Veteran Member
 
Posts: 820
Joined: Thu Sep 07, 2006 9:55 am
Location: Brevard, NC

Re: 912 Radiator Question

Postby alan » Wed Dec 01, 2010 4:59 pm

John,

I have had good luck in the past, early '90s, with a 582 radiator and the local radiator shop. To test it yourself, determine the running pressure of the system. It should be on the radiator cap. Seal off all exits and pump in carefully regulated air up to the running pressure. Emmerse in a bucket of clean water and check for bubble streams. Did I mention you should be careful about overpressure? If you don't wish to take a chance yourself, go to a long established auto radiator shop. Those guys know a great deal about radiators. Talk to the boss, not just whoever walks up. Tell them what you want done and the psi rating. They will even take the end caps off and check for corrosion and flow through the tubes. Don't mention aircraft as some businesses don't want the liability.

Alan
If I had known I would live this long I would have taken better care of myself.
User avatar
alan
Veteran Member
 
Posts: 345
Joined: Fri Feb 04, 2005 1:39 am
Location: Baytown, TX


Return to Rotax Engine Technical Discussions