by planecrazzzy » Sat Apr 29, 2006 12:42 pm
Hey Guys,
I have these Bicycle shop "cable guides" on my Carbs & Choke.....I have now put them
on my Brake cables.....
I made some Streamline Lift Strut Sleeves....and the brake cables coming out of the cage
were in the way.....I already had the Cable Guides because I planned on doing this anyway...
But now I had to .....
It lets the cables follow the landing gear legs, and gets rid of that "BIG HONKIN LOOP"
See Pictures below...
Gotta Fly...
Mike in MN
- Attachments
-

- Cable now follows the leg...
- s ( No Loop ) 001.jpg (61.17 KiB) Viewed 8346 times
-

- This is a close-up of the cable guide. You can buy them at a local Bicycle shop for around $3.00 ea.
- s ( No Loop ) 003.jpg (58.58 KiB) Viewed 8346 times
-

- This picture also shows the "old" hole where the cable used to come out....My foot caught the loop once and RIPPED the fabric...
- s ( No Loop ) 004.jpg (62.11 KiB) Viewed 8346 times
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...