vertical V type fuselage design

For the technical discussion of aircraft design to include engineering practices, design techniques, questions, and recommendations.

vertical V type fuselage design

Postby Versus » Thu Mar 02, 2006 7:23 pm

Hi everyone,

I came up with this design recently and I have some doubts that it will fly so I would like to ask for opinon here. Should I proceed with it or dump it? The concept is still in early phase so I thought to show in that phase while it's still fresh.
Looking foward for your comments,
Thanks
Attachments
drone.jpg
civil uav
drone.jpg (212.56 KiB) Viewed 2651 times
Versus
New Member
 
Posts: 1
Joined: Thu Mar 02, 2006 2:41 pm

Postby Othman » Thu Aug 24, 2006 3:56 pm

The tail of your design will work... but having the thrust line up high can cause trim problems, or at least a loss of efficient cruise flight.  If your intention was to get everything out of the camera field-of-view, you'd probably be better off having a conventional fuse in the front (lower thrust line) and dropping the camera lower into the bubble.
______________________________
Ashraf Othman
Othman
New Member
 
Posts: 3
Joined: Thu Aug 24, 2006 2:37 pm
Location: Ontario, Canada


Return to Aircraft Design