How do you terminate the aft end of the bottom stringer? There is no plug-in at that end, and I don't imagine you leave it flapping in the breeze back there...
thanks
Kevin
The bottom stringer
- KevinC
- Veteran Member
- Posts: 447
- Joined: Fri Aug 19, 2005 12:42 am
- Location: Prosser, Washington
-
- Veteran Member
- Posts: 184
- Joined: Thu Aug 17, 2006 12:20 am
Kevin,
The bottom stringer just goes up into the fuselage at the end. I flattened the last few inches of the tubing after the last stand off and bent it gently into the fuselage. This will give the fabric a smooth transition to the rear of the stringer. I looked for a picture and did not take one of that specific item, but if you look close it is in the background of this photo.
Dave
The bottom stringer just goes up into the fuselage at the end. I flattened the last few inches of the tubing after the last stand off and bent it gently into the fuselage. This will give the fabric a smooth transition to the rear of the stringer. I looked for a picture and did not take one of that specific item, but if you look close it is in the background of this photo.
Dave
-
- Forum Regular
- Posts: 25
- Joined: Thu Nov 03, 2005 6:23 pm
- Location: Eleva, WI
- Contact: