Super STOL Build Pics

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

Super STOL Build Pics

Postby Familyflyer » Sun Nov 17, 2013 11:03 pm

Here is a some pictures of some of the details on the SuperSTOL. There is not much to show how to do things so hopefully this will help others.

Where I am at today.
Image

The firewall. I bent the bottom and added a flange to the top so there will be no rubber seal. I felt the rubber would not be very air tight. This way will allow me to silicone the backside. Makes the boot cowl very rigid as well.
Image

Here you can see how the boot cowl fits. I lowered it as much as possible for the best view over the nose. You can also see how the front and root closer works for the wing. Just needed to be dimpled and riveted.
Image

Here you can see the aft fairing I built. I made it twist so much that it rolls right through lining up with the root wing closure. I also added a splice plate with # 6 nut plates at the joint so the skins fit perfect. That still needs to be riveted in. I have the turtle deck forward screw fastened from the inside, so the fairing fully riveted on.
Image

To Continue....
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby Familyflyer » Sun Nov 17, 2013 11:11 pm

Here is the rear view of the turtle deck. It removes just like the standard.
Image

This is the skylight area. I plan to use 090 as the thin lexan seems to flimsy. Any comments on that would be great.
Image

Here is the tank bay. I used rivnuts into the tube at the front and used nutplates everywhere else. I also reinforced the edge of the opening on the aft skin with a bent guage angle.
Image

Here is the aft view of the root closure.
Image

To Continue....
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby Familyflyer » Sun Nov 17, 2013 11:30 pm

Here is a bit closer view of the root closure. I also used Hysol when building the doors. It makes them more rigid.
Image

Here is my trim servo fairing. I built this before I even got the kit, glad it worked. I moved the servo forward for less weight on the end of the elevator.
Image

This is how I built the tray extension to move the servo forward.
Image

I reinforced the front floor boards with a small guage angle. You can also see the location of the park brake.
Image

I split the floor boards under the pushrod cover so they can come out with the pushrod in. I also added lightening holes to the very heavy pushrod cover. I may put holed in the skins, but they are so light and flimsy already.
Image

I added a bent guage angle for the interior fabric. It should help finish it nicely.
Image

So there you have it. This is where I am at. I wish I had these pictures when I was doing it. So I hope this helps others. It may not be all the best way, but it is the way I did it. I am just about out of things to do and then covering will begin. I am suppose to have my pre cover inspection this week, so that should allow the fabric process to begin. I have a few things to do on the wings, but for the most part it is as far as I can go before fabric.
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby orenjr » Mon Nov 18, 2013 7:32 am

Thanks! for the update Troy.This will be a great help to me when I get there.
Do you have a closeup picture of where you spliced the floor board?
Thanks! Oren
orenjr
Seasoned Member
 
Posts: 62
Joined: Tue Sep 17, 2013 6:58 am

Re: Super STOL Build Pics

Postby taildrgfun » Mon Nov 18, 2013 9:16 am

Looks to me like you are doing a real nice job.
Steve Henry, Wild West Aircraft
(the Dead Stick Take-off Guy)
taildrgfun
Veteran Member
 
Posts: 448
Joined: Sat May 17, 2008 12:34 am
Location: Nampa Idaho

Re: Super STOL Build Pics

Postby Familyflyer » Mon Nov 18, 2013 10:06 am

Yes Oren I can do that tonight. I think I will post wing pictures as well. There is details there that should help.

If there I any other shots people want, let me know. The plane will be all together for about one more week.

Steve, thanks for the compliment, I am trying :D
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby moving2time » Mon Nov 18, 2013 10:23 am

I don't think I have seen anyone close in around your wing root as thoroughly as you have. The metal work you have done looks very clean. It will be interesting to see what kind of numbers you achieve for your top end. You mentioned that the turtle deck is still removable. Will all the work that you are doing to fair out around the wing root prevent you from folding your wings?
Very nice looking work. Joe B
moving2time
Veteran Member
 
Posts: 202
Joined: Fri Oct 15, 2010 5:42 pm

Re: Super STOL Build Pics

Postby Familyflyer » Mon Nov 18, 2013 11:20 am

moving2time wrote:. Will all the work that you are doing to fair out around the wing root prevent you from folding your wings?
Very nice looking work. Joe B


The closures are riveted to the turtle deck and removes completly with the turtle deck. It slides right out, so the wings can still be folded. I riveted a nut plate to the turtle deck at the front so those two screws are installed from the inside. That way it is still quick to remove.
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby gkremers » Mon Nov 18, 2013 12:58 pm

Troy,
Looks like your doing a very nice job. I like the firewall to boot cowl idea. Did you bend the flange at a 90 degree angle and flute? What gauge and type material did you use.

Thanks
Gary
User avatar
gkremers
Veteran Member
 
Posts: 403
Joined: Sun Aug 08, 2010 8:06 am
Location: Michigan

Re: Super STOL Build Pics

Postby Familyflyer » Mon Nov 18, 2013 1:08 pm

gkremers wrote:Troy,
Looks like your doing a very nice job. I like the firewall to boot cowl idea. Did you bend the flange at a 90 degree angle and flute? What gauge and type material did you use.

Thanks
Gary


Yes I bent it 90 degree with 032 Aluminum material and fluted it. It would be best as 016-020 stainless. My thoughts were the aluminum is still superior to the rubber and seals much better. I had to cut teeth for the small tight turn at the end to curve it around. I just made a seperate short peice for that. I will be riveting the boot cowl to the flange after it is painted. The flange will get nut plates or camlocs for the front cowl attachment. If I ever need to take the boot cowl off, it will just be drilling a few rivets that are hidden under the cowl and the screws around the windsheild.
Troy Branch

SuperStol 914
Branchair on Youtube
http://www.amateurbuiltfamilyfun.com/
User avatar
Familyflyer
Veteran Member
 
Posts: 211
Joined: Thu May 16, 2013 5:10 pm

Re: Super STOL Build Pics

Postby kenryan » Mon Nov 18, 2013 2:25 pm

These are some great pictures and text. Thanks Troy!
Super Stol Kit #299
User avatar
kenryan
Veteran Member
 
Posts: 265
Joined: Sat Jan 01, 2011 3:46 pm
Location: anchorage, ak

Re: Super STOL Build Pics

Postby Johnny C! » Tue Nov 19, 2013 1:47 pm

Beautiful work!

John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.

I would much rather be looking down at the runway, than up at it.

Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
User avatar
Johnny C!
Veteran Member
 
Posts: 820
Joined: Thu Sep 07, 2006 9:55 am
Location: Brevard, NC

Re: Super STOL Build Pics

Postby Dave Krall CFII SEL SES » Wed Nov 20, 2013 2:35 pm

I like the lightening holes everywhere, they really give it that light but strong aeronautical look!
Dave Krall CFII SEL SES
Veteran Member
 
Posts: 922
Joined: Wed Mar 14, 2007 11:29 pm
Location: Seattle WA

Re: Super STOL Build Pics

Postby HS-JAT » Wed Nov 20, 2013 10:52 pm

Very nice work and craftsmanship. Keep updating!
HS-JAT
Veteran Member
 
Posts: 112
Joined: Fri Jun 01, 2012 10:18 am
Location: Bangkok, Thailand

Re: Super STOL Build Pics

Postby Tombat74 » Thu Nov 21, 2013 11:30 pm

This looks amazing so far Troy! Keep the build and pictures coming. Have you decided on a power plant?
Tombat74
Forum Regular
 
Posts: 20
Joined: Tue Aug 21, 2012 1:54 pm

Next

Return to Just Aircraft