Make "Flush" rivets - Invented

This is for Tools - Homemade or Modified or tools used to make your plane building easier

Make "Flush" rivets - Invented

Postby planecrazzzy » Thu Mar 13, 2014 10:25 pm

I priced Flush Rivets ( Pop )

Holy Cow... 14 cents EACH ( Or more )

I thought I'd try an experiment...

I drilled part of a hole in a piece of steel....

and I drilled a hole "Through" a piece of round stock...

I slipped a Stainless Steel pop rivet into the Hole (s)

in the plate steel... one hole was 1/8" for the size of the rivet to settle into place

The bigger counter sunk hole was to reshape the rivet...

anywho... after the rivet was in place... I slipped the round stock

onto it.... gave it a tap.... walla... instant flush rivet...
.
.
Later, I made the lower piece from the round stock...

and gave it two flat spots , to hold it in a Vise...

Now... I have Flush rivets for about 2 cents each...
.
Gotta Fly...
.
.

.
Attachments
Flat Rivet Maker 001.jpg
Flat Rivet Maker 003.jpg
Flat Rivet Maker 004.jpg
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
 
Posts: 758
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota

Return to Tools