SuperStol Wing Info
-
- Forum Regular
- Posts: 25
- Joined: Sun May 05, 2013 6:12 pm
SuperStol Wing Info
Just starting on my SuperStol wing assembly. ( No I did not go for the quick build option) Kit #315. Wondering if there are any suggestions on order of parts to install and when. Prints are detailed enough for the build but with no info in the build manual on the SuperStol wing, wondering what not to do, and in what order not to do it. I know that others have gone before me. Thanks for the help
- Familyflyer
- Veteran Member
- Posts: 211
- Joined: Thu May 16, 2013 5:10 pm
Re: SuperStol Wing Info
http://wingsforum.com/viewtopic.php?f=218&t=22923
Check out this tread. It should help. Also see this one.
http://wingsforum.com/viewtopic.php?f=218&t=23118
Check out this tread. It should help. Also see this one.
http://wingsforum.com/viewtopic.php?f=218&t=23118
-
- Forum Regular
- Posts: 25
- Joined: Sun May 05, 2013 6:12 pm
Re: SuperStol Wing Info
thanks for the pictures. sure it will help. wondering on dimensions for rib distances. pulley center points. Probably will just figure it out and make it work.
More challenging that way. Makes You more than just an assembler.
More challenging that way. Makes You more than just an assembler.
-
- Veteran Member
- Posts: 494
- Joined: Sat May 17, 2008 12:34 am
- Location: Nampa Idaho
Re: SuperStol Wing Info
The spars and ribs etc are all pre-drilled for alignment. Makes it pretty easy.
Steve Henry, Wild West Aircraft
(the Dead Stick Take-off Guy)
(the Dead Stick Take-off Guy)
-
- New Member
- Posts: 2
- Joined: Sun Apr 06, 2014 11:19 am
SuperStol Wing Airfoil
Does anyone know what type of airfoil is used on main wing of SuperSTOL? Thank you, J.