Hysol 9460
- mhcrowder
- Veteran Member
- Posts: 183
- Joined: Sat Aug 28, 2004 9:18 am
- Location: Cary, NC
- Contact:
Hysol 9460
I received two Hysol 9460 A/B in 300ml cartridges with my kit. What applicator gun have you used for dispensing the epoxy? Do I also need to buy mixing tips? The product is listed as being re-packaged by E.V. Roberts, if that helps.
Thanks!
==
Michael
Thanks!
==
Michael
Building Highlander #371
http://highlander371.blogspot.com/
http://highlander371.blogspot.com/
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: Hysol 9460
Check out this thread: http://www.wingsforum.com/viewtopic.php?f=218&t=22467.
I mix and sometimes apply the epoxy with a "tapered offset spatula", Aircraft Spruce part number Part # 01-24915 http://www.aircraftspruce.com/catalog/c ... kkey=40243.
I mix and sometimes apply the epoxy with a "tapered offset spatula", Aircraft Spruce part number Part # 01-24915 http://www.aircraftspruce.com/catalog/c ... kkey=40243.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
- Johnny C!
- Veteran Member
- Posts: 826
- Joined: Thu Sep 07, 2006 9:55 am
- Location: Brevard, NC
Re: Hysol 9460
I didn't see it mentioned in the linked thread,
but I mixed the 2 parts by size, eyeballed,
and then learned to let it set up for about
30 minutes, which kept it from being so
soupy. I found it much easier to keep it
neat for the application. But the good
thing is that it's mostly hidden once the
airframe is finished.
After re-reading the OP's comments,
I didn't have the mixer tube. Just a
couple of popsticks and a mixing pad.
Later!
John
but I mixed the 2 parts by size, eyeballed,
and then learned to let it set up for about
30 minutes, which kept it from being so
soupy. I found it much easier to keep it
neat for the application. But the good
thing is that it's mostly hidden once the
airframe is finished.
After re-reading the OP's comments,
I didn't have the mixer tube. Just a
couple of popsticks and a mixing pad.
Later!
John
There are many things that happen really fast when you are
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
flying an airplane. There is no sense in rushing any of the others.
I would much rather be looking down at the runway, than up at it.
Duane Sorenson & Rick Norton Gone West 6/8/09. Godspeed
- SuperFly
- Veteran Member
- Posts: 249
- Joined: Wed Jun 08, 2011 10:20 pm
- Location: Flanagan, IL
- Contact:
Re: Hysol 9460
Hysol needs to be applied in the first ten minutes after mixing, as it provides maximum adhesion. After this, the epoxy starts to cure and does not bond with the material. Always mix in small batches. It is mixed 50/50 by volume. I just used a tongue depressor stick or popsicle stick and mixed it on a small paper plate. After a bit, you get pretty good at amounts and the grey color is consistent between the batches.
Best,
Ben Schneider
Highlander #263 converted to SuperSTOL
N45FT Now Flying!
http://www.stolairplane.com
Ben Schneider
Highlander #263 converted to SuperSTOL
N45FT Now Flying!
http://www.stolairplane.com
- mhcrowder
- Veteran Member
- Posts: 183
- Joined: Sat Aug 28, 2004 9:18 am
- Location: Cary, NC
- Contact:
Re: Hysol 9460
Ok, Sounds like earlier, Just was delivering the Hysol in cans to customers. What was included in my kit was two cartridges of Hysol that use a dual plunger caulk gun style applicator. Since the guns are on the espensive side, I was wondering what others had bought. Yesterday I found a cheap gun on eBay that I'm going to try. We'll see how it works out.
==
Michael
==
Michael
Building Highlander #371
http://highlander371.blogspot.com/
http://highlander371.blogspot.com/
-
- Veteran Member
- Posts: 304
- Joined: Sun Jul 01, 2012 11:59 am
- Location: Big Bear Airport
Re: Hysol 9460
I mixed up small batches in paper cups and put it into the corner of a plastic bag. Cut off the corner of the bag and then it dispensed nicely and everything was disposable. I would apply it immediately and wipe up excess. Then after 30 - 90 minutes, it kick over but still be soft and I would smooth it out with my finger.
GDS
So Cal
Highlander #232
Rotax 912ULS, Dynon Skyview
So Cal
Highlander #232
Rotax 912ULS, Dynon Skyview
-
- Veteran Member
- Posts: 221
- Joined: Thu Mar 10, 2011 7:54 pm
- Location: Newark, Ohio
Re: Hysol 9460
Most of the two-part epoxies come in the dual-tube arrangement. That is just to ensure that is an identical amount of each component is dispensed. You still have to mix it manually. If there is such a thing as a "mixing tube", I am not aware of it. That would be handy....
Max Rentz
Newark, Ohio
Newark, Ohio
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: Hysol 9460
A disposable static mixing tube is good where you're going to be doing a lot of gluing, because you get continuous mixing, plus the application tip, in a single part. Here's an illustration of the mechanism in the tube:
The plastic mixing tube -- and all the partially-mixed Hysol in it -- is discarded after each use. On small jobs, you can end up discarding many times as much material as you use.You do not have the required permissions to view the files attached to this post.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
-
- New Member
- Posts: 5
- Joined: Sat Oct 20, 2012 10:02 am
Re: Hysol 9460
Did you ever get a reply about a gun to use for Hysol? I found this one and am waiting on a reply from them to see if it will fits Just's Hysol tubers. Nice that they gave use a hint on where to get this stuff.
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Hysol 9460
sonex293 wrote:I received two Hysol 9460 A/B in 300ml cartridges with my kit. What applicator gun have you used for dispensing the epoxy? Do I also need to buy mixing tips? The product is listed as being re-packaged by E.V. Roberts, if that helps.
Thanks!
==
Michael
I have the same question. I called the manufacturer on the label and they said they would email the answer, but still NORDO. I used to use T-88 that had a gun mixer, like the post above, but the cartridges are different.
So if anyone has a source, or an idea on getting to hysol out of the tubes I'm all ears
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- mhcrowder
- Veteran Member
- Posts: 183
- Joined: Sat Aug 28, 2004 9:18 am
- Location: Cary, NC
- Contact:
Re: Hysol 9460
I found the following gun on EBay for $17.60 shipped back in July. Seems to work well.
"DYNA-WELD PLASTIC PARTS REPAIR SYSTEM, MANUAL APPLICATOR GUN FOR 300ML"
==
Michael
"DYNA-WELD PLASTIC PARTS REPAIR SYSTEM, MANUAL APPLICATOR GUN FOR 300ML"
==
Michael
Building Highlander #371
http://highlander371.blogspot.com/
http://highlander371.blogspot.com/
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Hysol 9460
I have been out of the aircraft building business since for a while. This forum is a resource that I could not have imagined 15 years ago. Thanks to all. And you guys play nice toosonex293 wrote:I found the following gun on EBay for $17.60 shipped back in July. Seems to work well.
"DYNA-WELD PLASTIC PARTS REPAIR SYSTEM, MANUAL APPLICATOR GUN FOR 300ML"
==
Michael
![Wink :wink:](./images/smilies/icon_wink.gif)
Thanks!!!!!
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
-
- New Member
- Posts: 5
- Joined: Sat Oct 20, 2012 10:02 am
Re: Hysol 9460 gun link
I bought this gun and the Just's Hysol cartridges fit if you trim off 1/2" off the cartridge. I ordered it on the 17th and they were delivered by noon on the 19th, via Fedex. Haven't used them yet but they are very heavy duty. Not at all like the Home Depot caulk guns.
http://www.ebay.com/itm/130693564072?_t ... EBIDX%3AIT
http://www.ebay.com/itm/130693564072?_t ... EBIDX%3AIT
-
- Veteran Member
- Posts: 445
- Joined: Mon Mar 17, 2008 9:40 pm
- Location: toccoa Ga
Re: Hysol 9460
I just bought a pneumatic gun on ebay for 40.00 just like the one we use at the factory. the deals are there you just have to look for them. Jak P.S. its much cheaper for us to get the glue in the cartridges and ship that way you will have less waste and its easier to store, that's the reason for the change.
Pick up a rifle and you instantly change from a subject to a citizen.
-
- New Member
- Posts: 5
- Joined: Sat Oct 20, 2012 10:02 am
Re: Hysol 9460
That's nice Jak, but where did you buy it, got a link?