Prince Prop Update

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.
Post Reply
levyland
Veteran Member
Posts: 254
Joined: Sat Dec 15, 2012 3:50 pm

Prince Prop Update

Post by levyland »

Howdy Everyone,

I recently came back to NZ from the States with a 80x36 Prince Prop.

Like Steve I had been flying with a Catto which has incredible take off capabilities, but terrible cruise 69 knots GS.

I have one word word to say about this prop AWESOME!

I chucked it on and my static was 5430 but I could not hold the brakes on, but will report back with an exact static.

Once I released the brakes the initial thrust was phenomenal.

I have not done an actual pull test yet but is was very impressive with the airplane literally jumping off the ground equal to or a wee bit better than the Catto.

The most important result was I picked up 10 knots on my ground speed to 79 knots GS.

My goal is to go 90 knots GS and I think with a bit of increased pitch (possibly 40) and a couple of other clean ups on the airframe I will be knocking on that.

Equally important was the problems I was having getting the airplane on the step and out of the low tail syndrome has been eliminated.

Also the elevator and horizontal stabiliser are now parallel.

I will report more once I get additional flight data. There has been quite a bit of discussion as to what prop is best and at this stage I am very impressed with the Prince.
orenjr
Seasoned Member
Posts: 62
Joined: Tue Sep 17, 2013 6:58 am

Re: Prince Prop Update

Post by orenjr »

Levy
Do you have a 80x36 or a 80x38 .
In the other post you said you had a 80x38.
Sounds like you are getting great performance.
I hope someone will give me some input on what prop I should use on my 914.
Lonnie is suggesting a 78x48 but i see everyone else is using a longer prop with less pitch.
Keep us updated on your performance.
Thanks! Oren
levyland
Veteran Member
Posts: 254
Joined: Sat Dec 15, 2012 3:50 pm

Re: Prince Prop Update

Post by levyland »

Im sorry it is a 80 x 38 yes it is working very well. More info as I get some more hours cheers John
Allan
Seasoned Member
Posts: 68
Joined: Fri Dec 06, 2013 8:05 pm
Location: West Australia

Re: Prince Prop Update

Post by Allan »

John,

What's your indicated air speed?

Allan
User avatar
Av8r3400
Seasoned Member
Posts: 57
Joined: Mon Aug 04, 2008 6:50 am
Location: North Central Wisconsin
Contact:

Re: Prince Prop Update

Post by Av8r3400 »

Have you done the Mass Moment of Inertia test on it? I'd love to know how it scored...

http://www.aviasport.com/Rotax/Document ... 11ul91.pdf
Av8r3400
User avatar
Av8r3400
Seasoned Member
Posts: 57
Joined: Mon Aug 04, 2008 6:50 am
Location: North Central Wisconsin
Contact:

Re: Prince Prop Update

Post by Av8r3400 »

Any updates to your Prince Prop flight testing?
Av8r3400
Post Reply

Return to “Just Aircraft”