Need wing and fuselage rotisseries!!!
-
- New Member
- Posts: 1
- Joined: Fri Jul 31, 2015 3:01 pm
Need wing and fuselage rotisseries!!!
Does anyone want to part with their wing and fuselage rotisseries???? I can build them, but I figure there has to be a bunch sitting around finished builders don't need. Grant 352-267-4663
-
- Veteran Member
- Posts: 239
- Joined: Wed Aug 19, 2009 12:07 pm
- Location: Greensboro, NC
Re: Need wing and fuselage rotisseries!!!
Hi Daisy (Cool Name)..I made my wing rotisserie's out of 2X4's from a plan in the EAA magazine but next time I'm going with this guys idea
http://www.romeolima.com/RV8/Paint.h...ting%20process
Scroll down and you see the end plate bolted on and supported by chains.
I made a fairy cheap rotisserie for the fuse from a Harbor Freight engine stand and a plywood "firewall" for the front end and a saw horse for the tail...works well
http://www.romeolima.com/RV8/Paint.h...ting%20process
Scroll down and you see the end plate bolted on and supported by chains.
I made a fairy cheap rotisserie for the fuse from a Harbor Freight engine stand and a plywood "firewall" for the front end and a saw horse for the tail...works well
Plan not to be the first at the scene of the accident!
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: Need wing and fuselage rotisseries!!!
Try this link for that: http://www.romeolima.com/RV8/Paint.htm.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
-
- Veteran Member
- Posts: 390
- Joined: Mon Apr 19, 2010 8:24 am
Re: Need wing and fuselage rotisseries!!!
Dog, you're not done with your Highlander yet?SheepdogRD wrote:Try this link for that: http://www.romeolima.com/RV8/Paint.htm.
- SheepdogRD
- Proprietor
- Posts: 933
- Joined: Tue Nov 30, 2010 5:41 pm
- Location: West of Atlanta, GA
Re: Need wing and fuselage rotisseries!!!
Not yet, but the engine is on, so I'm closing in on it. The hold-up has been the changes I've made. In retrospect, I've never come close to accurately estimating the additional time it would take to make any one of the changes. They always present new issues, and even little changes take about ten times as long as building to the manual. Taken together, they've added years to my build. It's been fun designing and building them, and I think the results will be worth the effort. We'll see when she flies...xpflyr wrote:Dog, you're not done with your Highlander yet?
Speaking of holding things up, my rotisseries are promised to another builder. They're made from 2x4s, and I didn't envision them for more than one build. I'll do a little strengthening before I send them on their way.
Richard Holtz
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.
Highlander N570L -- Ms. Tonka -- in gestation
If just enough is really good, then too much ought to be perfect.