Sturdy work bench
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Sturdy work bench
This builder’s sight has been a little dormant since Keith built his record-breaking build assist. So I’ll chime in here from time to time, and let you all know how my build is progressing:
I had just started working on my project when ….. last January I was taking a bag of mineral to the cattle on our farm, and stepped into a deep hole and BAM, torn meniscus. Surgery, Rehad, Etc….. So now its January 2017 and I’ve finally addressed all of my wife’s honey dos, accumulated since my mishap; BUT, too cold to work in my unheated hangar. There’s room to work for the wings in the basement, so I brought one in and started on it. I have a Quick Build kit that was Rigged to fuselage, leading edge wrap, and tanks installed. The Ping-Pong table is full of parts and tools, the folding card table is full; so were to work? Ah, I’ll make a new sturdy work bench (I have lots of spare wood in the barn). I go and Google “sturdy work bench plans”, and #3 hit from the top is a YouTube that describes this:
“Quantity 2 4X4s
Quantity 4 2X4s
Quantity 4 Simpsion RTC 42
Bunch of crews (I used 1 ¼ in pocket screws)
¾ inch plywood to fit (for top)
Total cost $80 bucks”
I had the wood already, and found an old countertop the was a second at Lowes .
So in 2 hours, with my 14 year old’s help I had an awesome STURDY work Bench.
The key was the Simpson Strong RTC 42 (Google it) which was the only component that I bought.
Pictures below.
I had just started working on my project when ….. last January I was taking a bag of mineral to the cattle on our farm, and stepped into a deep hole and BAM, torn meniscus. Surgery, Rehad, Etc….. So now its January 2017 and I’ve finally addressed all of my wife’s honey dos, accumulated since my mishap; BUT, too cold to work in my unheated hangar. There’s room to work for the wings in the basement, so I brought one in and started on it. I have a Quick Build kit that was Rigged to fuselage, leading edge wrap, and tanks installed. The Ping-Pong table is full of parts and tools, the folding card table is full; so were to work? Ah, I’ll make a new sturdy work bench (I have lots of spare wood in the barn). I go and Google “sturdy work bench plans”, and #3 hit from the top is a YouTube that describes this:
“Quantity 2 4X4s
Quantity 4 2X4s
Quantity 4 Simpsion RTC 42
Bunch of crews (I used 1 ¼ in pocket screws)
¾ inch plywood to fit (for top)
Total cost $80 bucks”
I had the wood already, and found an old countertop the was a second at Lowes .
So in 2 hours, with my 14 year old’s help I had an awesome STURDY work Bench.
The key was the Simpson Strong RTC 42 (Google it) which was the only component that I bought.
Pictures below.
You do not have the required permissions to view the files attached to this post.
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Sturdy work bench
One more Pix
You do not have the required permissions to view the files attached to this post.
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Sturdy work bench
The pocket screws were to draw down the countertop. I used 1" drywall screws to attach the Simpson Strong RTC42 (but in the future I'll use pocket screws for the RTC 42, as these screws have a flange to lay flat on the metal). There is a little trick to the RTC 42; screw in the 2X4s beams first, then screw in the outside 4X4 screws and last the interior 4X4 screws. That will draw it all together nice and tight. Good luck
Bruce
Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: Sturdy work bench
I've built 3 work benches using those brackets, they definitely make for an sturdy bench, and they are fast and easy to build.
I used 5/8 inch plywood for the top and put a storage shelf about 1/2 way up the legs so I could store supplies on the shelf & on the floor.
I used 5/8 inch plywood for the top and put a storage shelf about 1/2 way up the legs so I could store supplies on the shelf & on the floor.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
-
- Veteran Member
- Posts: 243
- Joined: Fri Oct 15, 2010 5:42 pm
Re: Sturdy work bench
Nice table. I have never seen the Simpson rtc42 brackets so I learned something. Most build tables I have seen has apiece of particle board or plywood for the top. The intent was to screw or drill into the top as necessary while building. It was considered disposable. Those brackets look like they make assembly fairly simple. I like it! You thinking of building a rotisserie for the wings and/or fuselage? Joe B
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Sturdy work bench
Hey JoeB,
It was easy-peasy to build. I would usually use particle board for the top, but 25 years ago I was walking through Lowe's, and way in the back there were 3 countertops stacked up. each of different color and length. There was a "Manager"s Special" sign on them. No price. SOoo I went and found the manager and he asked "what will you pay for them". I said a "hundred bucks". I took them home. My father took 1 and I immediately took the 10 footer and made my central shop bench. I've built 3 aircraft on it. The 6 footer had been tucked away in my Barn/Hangar for years. I almost forgot that I had it.
As for the rotisseries, I had never used one on any of my previous build, BUT I saw all types, between the JA factory and builder's blogs and websites. The one that caught my eye was the one that they used at the site where Keith Showalter built his Super-Stol. They had modified a Harbor Freight engine stand into a Rotisserie. I only saw it in the background, but why improvise when you can plagiarize.
I'm at Harbor Freight at least twice a month, so I got 3 of the type Keith was using. I took it to a friend who had a gravity band saw and cut them. As you see I took some of my 2X2 metal square stock and welded the stand into a vertically adjustable Rotisserie. Some here like to weld their own and I did 1 but, time is money for me, so this was the quickest for the next 3. Here it is:
It was easy-peasy to build. I would usually use particle board for the top, but 25 years ago I was walking through Lowe's, and way in the back there were 3 countertops stacked up. each of different color and length. There was a "Manager"s Special" sign on them. No price. SOoo I went and found the manager and he asked "what will you pay for them". I said a "hundred bucks". I took them home. My father took 1 and I immediately took the 10 footer and made my central shop bench. I've built 3 aircraft on it. The 6 footer had been tucked away in my Barn/Hangar for years. I almost forgot that I had it.
As for the rotisseries, I had never used one on any of my previous build, BUT I saw all types, between the JA factory and builder's blogs and websites. The one that caught my eye was the one that they used at the site where Keith Showalter built his Super-Stol. They had modified a Harbor Freight engine stand into a Rotisserie. I only saw it in the background, but why improvise when you can plagiarize.
I'm at Harbor Freight at least twice a month, so I got 3 of the type Keith was using. I took it to a friend who had a gravity band saw and cut them. As you see I took some of my 2X2 metal square stock and welded the stand into a vertically adjustable Rotisserie. Some here like to weld their own and I did 1 but, time is money for me, so this was the quickest for the next 3. Here it is:
You do not have the required permissions to view the files attached to this post.
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
-
- Veteran Member
- Posts: 114
- Joined: Wed Feb 12, 2014 8:19 pm
- Location: Anchorage, AK
Re: Sturdy work bench
Those engine stand rotisseries work great! That's a Rob Pedersen invention, who knows where he got the idea from. If you're careful you can actually move wings around by yourself with these. I think Rob said he installed both wings on his SS by himself with these stands, it's much easier with two people but it can be done with just one.
Keith Showalter
More Photos at www.keithshowalter.com
Anchorage, Alaska Superstol N445K
Built in NC with Rob Pedersen, Plane Fun Aircraft
More Photos at www.keithshowalter.com
Anchorage, Alaska Superstol N445K
Built in NC with Rob Pedersen, Plane Fun Aircraft
-
- Veteran Member
- Posts: 243
- Joined: Fri Oct 15, 2010 5:42 pm
Re: Sturdy work bench
Bruce, So you cut the vertical tube and welded 2x2 tubes into the base to make it adjustable? I need to head out to Harbor freight to check out their engine stand models. Looks like a quick modification with wheels already to go. Another great Idea Rob. Thanks guys. Joe B
-
- Veteran Member
- Posts: 578
- Joined: Sun Mar 22, 2015 7:49 pm
- Location: Garland, Texas
Re: Sturdy work bench
FYI, Harbor Freight Engine Stand. A 750 Pound Capacity Engine Stand for $49, definitely a good Price. However, I purchased on at a Garage sale for $10. You might consider going to your Local Pawn Shops, they always have mechanics tools, at very reasonable prices.
AV8R Paul
Certified Light Sport Repairman LSRM-A
Certified Light Sport Repairman LSRM-A
- BucF16
- Veteran Member
- Posts: 463
- Joined: Sun Mar 23, 2014 11:47 am
- Location: Alexandria, Ohio
Re: Sturdy work bench
The 1000# one is a better choice ( unfortunately I didn't make it) as the post is vertical. I had to make a later cut and re-weld so that to rotisserie was perpendicular to the ground.
Bruce
Bruce
Bruce Johnson Highlander # 393
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com
"Because I fly, I envy no man on Earth"
Builder web site:
http://www.bruceshighlander.blogspot.com