912 Sensors

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

912 Sensors

Postby jjacky » Thu Oct 26, 2017 3:31 pm

Hi All..I am finally drilling through the firewall and getting serious about how much instrumentation I really need. I'm planning on oil temp and pressure but only the CHT off of cylinder #3 and perhaps no EGT. Am I missing anything here. With these barometric carbs is there anything meaningful about EGT. Is EGT historical data important. What say you Obi-Wan Kenobies?
Plan not to be the first at the scene of the accident!
jjacky
Veteran Member
 
Posts: 215
Joined: Wed Aug 19, 2009 12:07 pm
Location: Greensboro, NC

Re: 912 Sensors

Postby av8rps » Thu Oct 26, 2017 8:22 pm

I many times wondered why we monitor the EGT on a 912 when we can't do anything about it?
av8rps
Veteran Member
 
Posts: 433
Joined: Thu May 12, 2011 5:01 pm

Re: 912 Sensors

Postby z987k » Thu Oct 26, 2017 11:42 pm

You can change the needle clip position.
z987k
New Member
 
Posts: 7
Joined: Mon Jul 03, 2017 9:38 pm


Return to Just Aircraft