JDavis2a

Welcome to the FORUM. The purpose of this forum is to "formally" introduce yourself to other members. Please tell us about your flying, hobbies, interests, etc. etc.
Post Reply
jdavis2a
New Member
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm

JDavis2a

Post by jdavis2a »

I am a retired aircraft mechanic from the Tulsa OK. area. I have built a Davis DA-2A and a Pietenpol, both Corvair powered. Always willing to answer questions if I know the answer:) Jim Ballew
Davis2A/Piet/Corvair
User avatar
Sean_Caranna
Founder
Posts: 231
Joined: Thu Aug 12, 2004 12:34 am
Location: Daytona Beach, FL

Post by Sean_Caranna »

How does the control mixer work for the DA-2A V tail work?
"I'll have what the gentleman on the floor is having."
jdavis2a
New Member
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm

Post by jdavis2a »

The mixer for the Davis is very simple but hard to explain.  It only took me an afternoon to build and install the mixer unit so it can't be too difficult.  It would be easier to explain over the phone than try to write it out.  If you would like I will provide a phone number.  JIM
Davis2A/Piet/Corvair
User avatar
Sean_Caranna
Founder
Posts: 231
Joined: Thu Aug 12, 2004 12:34 am
Location: Daytona Beach, FL

Post by Sean_Caranna »

That would be great.  Just Private Message me at the link below with the number and best time to call.  If it's good for you, I could give a ring later this afternoon.
http://www.wingsforum.com/privmsg.php?mode=post&u=2

Thanks!

Sean C.
Last edited by Sean_Caranna on Sun Jul 10, 2005 2:12 pm, edited 1 time in total.
"I'll have what the gentleman on the floor is having."
jdavis2a
New Member
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm

Post by jdavis2a »

Just about anytime thisafternoon or after 5:30 during the week.  Hear is the number.
1-918-xxx-xxxx (hidden to protect  user privacy. SCC)
Davis2A/Piet/Corvair
Post Reply

Return to “Introductions”