JDavis2a

Welcome to the FORUM. The purpose of this forum is to "formally" introduce yourself to other members. Please tell us about your flying, hobbies, interests, etc. etc.

JDavis2a

Postby jdavis2a » Tue Aug 31, 2004 9:29 pm

I am a retired aircraft mechanic from the Tulsa OK. area. I have built a Davis DA-2A and a Pietenpol, both Corvair powered. Always willing to answer questions if I know the answer:) Jim Ballew
Davis2A/Piet/Corvair
jdavis2a
New Member
 
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm

Postby Sean_Caranna » Sun Jul 10, 2005 12:27 am

How does the control mixer work for the DA-2A V tail work?
"I'll have what the gentleman on the floor is having."
User avatar
Sean_Caranna
Owner
 
Posts: 231
Joined: Thu Aug 12, 2004 12:34 am
Location: Daytona Beach, FL

Postby jdavis2a » Sun Jul 10, 2005 9:52 am

The mixer for the Davis is very simple but hard to explain.  It only took me an afternoon to build and install the mixer unit so it can't be too difficult.  It would be easier to explain over the phone than try to write it out.  If you would like I will provide a phone number.  JIM
Davis2A/Piet/Corvair
jdavis2a
New Member
 
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm

Postby Sean_Caranna » Sun Jul 10, 2005 11:09 am

That would be great.  Just Private Message me at the link below with the number and best time to call.  If it's good for you, I could give a ring later this afternoon.
http://www.wingsforum.com/privmsg.php?mode=post&u=2

Thanks!

Sean C.
Last edited by Sean_Caranna on Sun Jul 10, 2005 2:12 pm, edited 1 time in total.
"I'll have what the gentleman on the floor is having."
User avatar
Sean_Caranna
Owner
 
Posts: 231
Joined: Thu Aug 12, 2004 12:34 am
Location: Daytona Beach, FL

Postby jdavis2a » Sun Jul 10, 2005 2:06 pm

Just about anytime thisafternoon or after 5:30 during the week.  Hear is the number.
1-918-xxx-xxxx (hidden to protect  user privacy. SCC)
Davis2A/Piet/Corvair
jdavis2a
New Member
 
Posts: 4
Joined: Tue Aug 31, 2004 5:31 pm


Return to Introductions

cron