Blueprint Software

For the technical discussion of aircraft design to include engineering practices, design techniques, questions, and recommendations.

Blueprint Software

Postby SpeedySB » Sat Mar 24, 2007 4:45 pm

I need an inexpensive design & blueprint software for an experimental aircraft, 100% homebuilt from ground up. I want to build an aluminum, 4 seat, single engine, mono low wing airplane. It would be great if the software would do blueprints, parts list, wing design and placement. Inexpensive means way under $500, any ideas??

Thanks,
SpeedySB
SpeedySB
New Member
 
Posts: 3
Joined: Sat Mar 24, 2007 2:46 pm
Location: Tennessee

RE: Blueprint Software

Postby waded » Fri Jun 01, 2007 12:56 pm

Did you find a suitable low cost software program?  If so, I am also interested.  I purchased AirplanePDQ from http://www.davincitechnologies.com/  This program is good for initial sizing, but you have to do the calculations for the final design.  But, it at least will give realistic aircraft size & performance numbers for a proposed design.  They have a limited edition that you can download for evaluation.

Thanks.....
waded
New Member
 
Posts: 1
Joined: Fri Jun 01, 2007 12:47 pm

Re: Blueprint Software

Postby Aerco » Wed Jul 08, 2009 12:41 pm

SpeedySB wrote:I need an inexpensive design & blueprint software for an experimental aircraft, 100% homebuilt from ground up. I want to build an aluminum, 4 seat, single engine, mono low wing airplane. It would be great if the software would do blueprints, parts list, wing design and placement. Inexpensive means way under $500, any ideas??

Thanks,
SpeedySB


I'm sorry, but there is no such thing. You can get aerodynamic analysis programs such as "PDQ" mentioned above, and you can get structural analysis programs such as NASTRAN, but you still have to design the airplane yourself in all its details. There is no program that will spit out "blueprints" or "parts list" for you.  It sounds (and please take no offense at this)   as if you are at the very bottom of the learning curve required to design an aircraft and computers can only help so much in that regard - you need to learn the basic principles first.
Aerco
New Member
 
Posts: 2
Joined: Sun Jul 05, 2009 5:10 pm

Re: Blueprint Software

Postby shorty » Sat Feb 27, 2010 5:42 pm

I took a couple of programs for a "test drive" and found that my drafting table and calculator are much easier for me to use.
Thanx
 Shorty
http://st3gamefarm.com
User avatar
shorty
New Member
 
Posts: 14
Joined: Tue Dec 07, 2004 11:01 pm

Re: Blueprint Software

Postby Robert Dingus » Wed Dec 12, 2012 10:32 pm

DeltaCad from midnight software is a very good program and is free, if it times out after 30 days just reinstall it, or pay 40.00 for a registered copy, works with dxf and dc formats been using for years :D
Robert Dingus
New Member
 
Posts: 11
Joined: Sat Apr 14, 2012 4:57 pm


Return to Aircraft Design