Interior photos

For general discussion of the Just Aircraft family of aircraft.
Includes: Highlander, Escapade, Summit and SuperSTOL.

Moderator: scubarider2

Interior photos

Postby gme9261236 » Tue Apr 17, 2007 7:19 pm

just about done with the interior, thought I would post a few photos of the progress....Disregard the dirty rear cargo floor, it is covered with dust and I didnt feel like cleaning it for the photo shoot. *note the rear window to view the elevator control linkage for preflight*
Image
Last edited by gme9261236 on Tue Apr 17, 2007 7:23 pm, edited 1 time in total.
gme9261236
Veteran Member
 
Posts: 174
Joined: Sat Jan 27, 2007 11:01 pm
Location: Hampton, NH 7B3

Postby gme9261236 » Tue Apr 17, 2007 7:20 pm

Image
gme9261236
Veteran Member
 
Posts: 174
Joined: Sat Jan 27, 2007 11:01 pm
Location: Hampton, NH 7B3

Postby gme9261236 » Tue Apr 17, 2007 7:21 pm

Image
gme9261236
Veteran Member
 
Posts: 174
Joined: Sat Jan 27, 2007 11:01 pm
Location: Hampton, NH 7B3

Postby Dave Krall CFII SEL SES » Tue Apr 17, 2007 8:40 pm

Looking great...
Were the pistons for the doors included in the kit or an extra?
Dave Krall CFII SEL SES
Veteran Member
 
Posts: 922
Joined: Wed Mar 14, 2007 11:29 pm
Location: Seattle WA

Looks great

Postby scubarider » Wed Apr 18, 2007 8:02 am

The pictures look great.  I like the windows you installed on the sides behind the seats.  I too am curious about the door pistons.  Did you do something different for the fuel header or just not installed it yet?
Dennis
Living life on the edge makes me dizzy.  I love Dizzy!
scubarider
Veteran Member
 
Posts: 287
Joined: Sun Dec 24, 2006 10:06 am
Location: Cleveland, GA

Postby gme9261236 » Wed Apr 18, 2007 9:23 am

The door pistons are not included in the kit. They were a pretty big project and we ended up making special brackets for them with our sheet metal break. They work great though and from the closed position a slight pull on the door will swing the door all the way up to their stops which is just about an inch shy of hitting the underside of the wing.


Fuel header tank is not in yet. That is todays project, the interior trim where the header tank will go is not secured so we can modify it as needed. We opted for the larger header tank with the fuel sight guage on it.
gme9261236
Veteran Member
 
Posts: 174
Joined: Sat Jan 27, 2007 11:01 pm
Location: Hampton, NH 7B3

Postby jd » Mon Jul 16, 2007 8:34 pm

looks good enuff to sleep in if ya needed to
jdhogg
jd
New Member
 
Posts: 19
Joined: Mon Jul 09, 2007 4:29 pm
Location: irrigon,orygun

Postby jd » Mon Jul 16, 2007 8:38 pm

what is yer interior made up of?it looks like indoor out door stuff
jdhogg
jd
New Member
 
Posts: 19
Joined: Mon Jul 09, 2007 4:29 pm
Location: irrigon,orygun

Postby gme9261236 » Wed Jul 18, 2007 5:53 am

It is hard to tell by the photo but the interior is actually a tweed like material. It is similiar to the material the seats are made of
gme9261236
Veteran Member
 
Posts: 174
Joined: Sat Jan 27, 2007 11:01 pm
Location: Hampton, NH 7B3

Postby jd » Wed Jul 18, 2007 9:45 am

it looks fantastic!
jdhogg
jd
New Member
 
Posts: 19
Joined: Mon Jul 09, 2007 4:29 pm
Location: irrigon,orygun

Just got my pistons

Postby scubarider » Sun Jul 22, 2007 1:38 pm

I just picked up my pistons at Wahalla. {free}   :D
Ordered some boat window open/close locks.  Will get some pics for everyone soon.
My fiberglass friend built me some door latchs much better than the single mount supplied.
Dennis
Living life on the edge makes me dizzy.  I love Dizzy!
scubarider
Veteran Member
 
Posts: 287
Joined: Sun Dec 24, 2006 10:06 am
Location: Cleveland, GA

pistons

Postby pdeinin » Thu Jul 26, 2007 4:02 pm

Can you tell me anything more about the pistons.  In particular, how long is the stroke?
Prescott
pdeinin
New Member
 
Posts: 17
Joined: Sat Jun 23, 2007 10:24 am
Location: New Orleans


Return to Just Aircraft