.
Blasting and Painting with Epoxy Primer.
,
Gotta Fly...
(12) Controls ( Mike )
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Re: (12) Controls ( Mike )
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Re: (12) Controls ( Mike )
looking around, I never logged this "splice"
Lemme Splain...
Shipping was cheaper with UPS, BUT , there's an 8 ft limit...
This was when I ordered my wing tubing.
My flap torque tubes ended up being SHORT.
When I added the length it needed.
I cut the tube at 30 degrees , and I added a 3-1/2" insert.
The chromoly insert fit perfect, and help keep the torque tube splice straight .
I also seal welded the tubes at the end.
As an added bonus I think it helped strengthen the tube for clamping the control arm.
In the pictures you can also see the CAP I put at the end of the aileron torque tubes.
.
Gotta fly...
PS The bolt is there to show you the length of the insert.
.
Lemme Splain...
Shipping was cheaper with UPS, BUT , there's an 8 ft limit...
This was when I ordered my wing tubing.
My flap torque tubes ended up being SHORT.
When I added the length it needed.
I cut the tube at 30 degrees , and I added a 3-1/2" insert.
The chromoly insert fit perfect, and help keep the torque tube splice straight .
I also seal welded the tubes at the end.
As an added bonus I think it helped strengthen the tube for clamping the control arm.
In the pictures you can also see the CAP I put at the end of the aileron torque tubes.
.
Gotta fly...
PS The bolt is there to show you the length of the insert.
.
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...
- planecrazzzy
- Site Admin
- Posts: 1154
- Joined: Sat Jan 01, 2005 1:23 pm
- Location: Minnesota
- Contact:
Re: (12) Controls ( Mike )
.
At the other end of the torque tube ...
My wear bearings are "spots" of silicone bronze...
Cheap , light, easy.
.
Gotta Fly...
.
At the other end of the torque tube ...
My wear bearings are "spots" of silicone bronze...
Cheap , light, easy.
.
Gotta Fly...
.
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
Gotta Fly...
and build your wings on the way down...
Gotta Fly...