Rivet Gun
-
- Veteran Member
- Posts: 239
- Joined: Wed Aug 19, 2009 12:07 pm
- Location: Greensboro, NC
Rivet Gun
OK..tried to save on the cost of a Rivet Gun and used a "preciscion" hammer....flush rivets looked like %^**. So any recommendations on a rivet gun for general purpose (mostly small) Aircraft rivets.
Plan not to be the first at the scene of the accident!
- stede52
- Premium Member
- Posts: 1066
- Joined: Thu Sep 06, 2007 11:40 am
- Location: Carnation, WA
Re: Rivet Gun
I use a rivet hand squeezer for rivets close to edges otherwise I'll use a flat punch hammer and small anvil
Steve
Steve
Steve D N419LD
-
- Veteran Member
- Posts: 239
- Joined: Wed Aug 19, 2009 12:07 pm
- Location: Greensboro, NC
Re: Rivet Gun
Thought I was nuts for trying this but now there are two of us 8>)...and you have given me another thought on how to approach this....Thanks!
Plan not to be the first at the scene of the accident!