This propeller went to the United States.
The propeller is covered with fiberglass and clear varnish.
All the holes are formed.
Diameter - 1727 mm.
The propeller is individually designed to provide high performance RV-9 aircraft.
Individual design and production of wooden propellers
- meglin
- Veteran Member
- Posts: 103
- Joined: Sun Aug 16, 2015 9:22 am
- Location: Ukraine
- Contact:
Individual design and production of wooden propellers
You do not have the required permissions to view the files attached to this post.
- meglin
- Veteran Member
- Posts: 103
- Joined: Sun Aug 16, 2015 9:22 am
- Location: Ukraine
- Contact:
Re: Individual design and production of wooden propellers
We continue to design and produce propellers for individual orders.
- meglin
- Veteran Member
- Posts: 103
- Joined: Sun Aug 16, 2015 9:22 am
- Location: Ukraine
- Contact:
Re: Individual design and production of wooden propellers
Propeller for Limbach
You do not have the required permissions to view the files attached to this post.
- meglin
- Veteran Member
- Posts: 103
- Joined: Sun Aug 16, 2015 9:22 am
- Location: Ukraine
- Contact:
Re: Individual design and production of wooden propellers
"At long last I have flown my new aeroplane with your prop. It was only the first flight yesterday and for just 30 mins. My first impression is that the prop is very good match for both the 0320 and my airframe. The climb rate was up to 1500ft/min and level cruise at 2200/2300 revs nearly 120 Kts after only a very rough short evaluation. I think the 75% cruise will be 130kts so the prop must be very near to the best compromise available.
As you know many Vans 6 owners use the popular 0320 lycoming and the Vans is very similar in general configuration (but not construction) to my airframe so this spec prop should work well. As the Vans is very popular there should be a good market for your product."
As you know many Vans 6 owners use the popular 0320 lycoming and the Vans is very similar in general configuration (but not construction) to my airframe so this spec prop should work well. As the Vans is very popular there should be a good market for your product."