Introduction and file storage for Buttercup

Locked
User avatar
planecrazzzy
Site Admin
Posts: 1154
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota
Contact:

Introduction and file storage for Buttercup

Post by planecrazzzy »

'
This is a Plans Built Aircraft...
Buy a Blueprint and Find your material anywhere you can.

My building log has a number at the beginning of each "stage"....
I thought it would help to know what Order things were built....
Although , Sometimes I need to jump back to a stage....
The reason...Basically it's about getting the stage close , getting the Bulk of the parts looking like a plane.
...and do the finishing details later during final assembly .


Most Pictures have "Dates"
It helps to find things your looking for when they are sectioned like this.
It's a balance of pictures and babble...
and the beat goes on.
.
This link is to some of the Tools used :
http://www.wingsforum.com/viewforum.php?f=325
.
Gotta Fly...
Mike & "Jaz" the Flying Dogz




.
.
My Buttercup article in EAA Experimenter : (trying to find it again....)

.
.
This is a Buttercup/STOL Building Forum , Plenty of A&P , Engineers, and Builders to answer your questions...
https://groups.io/g/ButtercupSTOL
.
.
A Story about Steve Wittman and the Buttercup are Here :
.
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
Posts: 1154
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota
Contact:

Upper Door tube

Post by planecrazzzy »

I put a tube in , it wasn't on the print .
Later I learned that the Tailwind guys do something different with an Aluminum sheet .
Gotta Fly...
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
Posts: 1154
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota
Contact:

Mike's Engine-Turned Floor Pans

Post by planecrazzzy »

Someone made this PDF
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
Posts: 1154
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota
Contact:

SLICK Mags

Post by planecrazzzy »

here's a manual
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
User avatar
planecrazzzy
Site Admin
Posts: 1154
Joined: Sat Jan 01, 2005 1:23 pm
Location: Minnesota
Contact:

Articles

Post by planecrazzzy »

here's articles written about the Buttercup
You do not have the required permissions to view the files attached to this post.
Sometimes you just have to take the leap
and build your wings on the way down...
                Gotta Fly...
Locked

Return to “Mike's Buttercup project”