Here is a bit of an update.
Here is a side shot of the wing route.
I masked all the fuselage for painting.
I brushed the two coats on and got to spraying.
The filler primer went on with little trouble and looked good.
After all the coats of filler primer, I then sprayed the white primer for better color of the top coat. I also masked all the powder coated areas as the filler primer does not stick well to powder coat. The masking came off for the white primer as it sticks much better to the powder coat.
I put fabric around the windows to help hide the hysol glue. It made the window look quite good.
I rib laced all the empenage. This is what it looks like. It did not take much time and the fabric was much tighter with it done.
This is what it looks like with the tapes on.
I have brushed the filler primer on one wing and it is ready for spraying. Just waiting for outside temps to be better that -20c as high to get spraying again!
The engine should arrive in march and my avionics are soon shipping from Stein. All good so far.